A tile snap cutter is closer to a glass cutter than it is to the other tool for cutting tile, the wet tile saw. A glass cutter has a carbide wheel, which is slowly drawn across the glass with force to create a score mark.
Once the score is made, the glass is snapped off by hand or with a tool along the line. A tile snap cutter works in much the same way. A tile is inserted into the tool. A cutting wheel, mounted on a rail, is drawn by hand across the tile surface once or twice. After the score is made, a built-in tile snapper is moved into place over the score.
After the user pulls back on a lever, the snapper presses on the score until the tile snaps in half. A wet tile saw produces accurate cuts suitable for visible work. Every tile professional owns one and good models are expensive. Just like a table saw for wood, a spinning round blade cuts through the tile, with one exception—the blade is continually bathed in water to cool the tile and control debris. Wet tile saws produce clean, accurate cuts. Tile snap cutters can often produce an edge that, while straight, will have a few ragged sections.
Using a pencil or a marker, highlight the cut from the start to the end or you can just draw a straight line. Take the scoring wheel of the handheld tile cutter and stretch it over the highlighted line. Apply decent pressure so that the line becomes the weakest point on the whole tile. You may do that repeatedly until the tile is at its weakest point.
After you draw the scoring wheel over the marked line, step 4 is to place that tile on its line in between the jaws of the handheld tile cutter. Apply some pressure onto the tile and snap that tile into two pieces quickly. Always use the same amount of pressure to avoid breakage and get the perfect two pieces. This is not a mandatory step, but it is important when it comes to safety and finishing; it will also provide a much more attractive look.
Use a sharpening stone or sand paper to smooth the sides of the tile perfectly for the aesthetics. A handheld tile cutter is safe to use, unlike any other cutting tool which requires a lot of precaution and concentration; and even can be very dangerous to use.
But, while working with any sharp tool, you need to maintain some precautions to avoid the risk of any threats or any harmful situations. So, this efficient tool is a great and an easy option for performing any tiling job for beginners and professionals; everyone will be comfortable with this object. Also, this tool is one of the cheapest tools available in the market for tile cutting; therefore, it goes easy on your wallet as well. This impactful and safe tool can do your tiling job instantly and accurately if used in the right way.
Tiles can be cut in straight lines with a tile cutter but nothing more than that. How about cutting tiles for the curved surfaces? Will the same tile cutter work? There are ways to cut tiles without even using a tile cutter. Tiles of the floors have straight cuts and therefore the use of tile cutter makes sense. Let us now understand the cutting technique of tiles without using a tile cutter.
For better home improvement options; you can opt for a tile cutter from any regular departmental store. But it will take care of the small jobs only. However, if you intend to take care of the bigger jobs or your home requires thick tiles cutting; you will have to look around for other options as well for instance buying a wet saw to make special tile cuts.
Let us first understand the cutting of the tiles in straight lines and making holes. The first step to cutting tiles without a tile cutter is marking a point on the tile. The best is to mark the top of the tile from where you want to cut it into pieces.
Make sure you have an accurate measuring tape or any device to check the point marked. Marking the right points or markings will make a big difference in cutting the tiles in perfect angles. Now after the mark has been done, placing a square mark a little away from the marked point should be the next step.
Once the markings on the tiles are done; the next step is to square the tiles in proper manner. Place a square right away from where you have added the mark on the tile.
Next step is to use a sharp object for instance a glass cutter to score the tile right on the cut line. Place the tile on a hard surface. You can use a wired clothes hanger under the tiles aligned with the scored tile. Now give the either side of the tile a good pressing and break it along the scored line.
Once done; you have just cut the tile without using a tile cutter. To acquire finer edges; smooth the cut with the help of a concrete surface or a brick as you gently rub the tile over it. Now, it is time to place the tile on a solid surface, with a cloth hanger of wire under the tile with a proper alignment of the score.
After the alignment has been done, put pressure on both the sides of the tile equally. The tile will eventually break. The above process is considered to be one of the easiest ways of the two proven methods.
The other one is cutting tiles with the help of a wet saw. To use this technique of cutting a tile, follow the steps as mentioned below. It is imperative that each process is followed meticulously or else you might not get the perfect finesse of the cut.
Check out our detailed guide on wet tile saws to learn more about them. I am sure; you have got the confidence in making the cut on tiles in your home without the use of any tile cutter which people usually use. These methods of cutting the tile are convenient and quite cheaper compared to the use of tile cutter which is expensive to buy and maintain.
You can be the master of tile cutting with these simple steps followed with precision. They are expensive and the only precise way of receiving clean cuts during the operation. Additionally, the models utilize a two-step process of scoring then snapping the tile. Mostly, tile cutter machine design works on both ceramic and porcelain.
Furthermore, the dual-plated chrome-plated rugged steel rails and ball-bearing construction ensure smooth scoring on large tiles. The machine is useful for cutting ceramic tiles to specific sizes and shapes.
Additionally, it helps in removing irregular tile corners to facilitate proper tile fitting. The following is our research on how to use a manual tile cutter machine and consider factors before purchasing one. If you decide to cut your tiles manually , a manual tile cutter is a perfect choice.
It is safer, more comfortable, and a cheap method. Additionally, it is the ideal tile cutter in making straight cuts on ceramic tiles. The first score is quite important when using a tile cutter. A continuous and reliable motion will help you score the tile quickly. Make sure that you apply less pressure to avoid tile breakage and internal cracks while snapping.
Below are eight steps of using a manual tile cutter. For performing diagonal cuts, purchase a tile cutter with more width than corner to corner distance. Through the help of a rotating guide, you will be able to make cuts at different angles.
If you are a beginner, you need a practice cut using scrap or inexpensive pieces of tiles. Regular practicing enables you to make the perfect outcome of the project. The pencil is best in highlighting the cuts on the tiles on both sides.
0コメント